14 Jul 2020


NETGEAR WNR854T Network Driver

Company: NETGEAR
Model: WNR854T
Operating System: Not Applicable (Note: might work with other versions of this os.)


File: wnr854t_1_4_22.img



RangeMax™ Next Wireless Router - Gigabit Edition

WNR854T RangeMax Next Router -

Firmware Version 1.4.22

(World Wide version - except North America)

# Log in to the router using a Web broswer. The URL is ( if you did not change the router’s IP address ).

# Click Maintenance > Router Upgrade

# Click Browse and find the file you just downloaded.

# Click Upload. Do not interrupt the upgrade while the router does this step. The router reboots when the upgrade is done.

# After the router boots up, log in the router again.

You MUST Reset the router to default settings after upgrading the firmware

# Click Maintenance > Backup Settings

# Click Erase. The router reboots when the Erase operation is done.

# If you would like to check that the upgrade was successful, log in to the router again at, and check the firmware version.

# Re-configure the router with the settings you saved in step 1. Optionally, You can use the Smart Wizard configuration assistant on the CD to reconfigure the router.

File Contents:
No file content information available at this time.

Click here to go back to NETGEAR list.


Copyright and Terms of Use, © 2000- Network-Drivers.com. All rights reserved.
Do not copy or redistribute in any form